2 Safety
2.4 Basic safety instructions
22
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
Liquids under high pressure
The following liquids are under high pressure:
• Hydraulic oil
Liquids escaping under high pressure may penetrate through the skin and cause severe
injuries.
Shut down and safeguard the machine and contact qualified specialist workshop upon
suspicion of damaged pressure system.
Never detect leaks with bare hands. Even a very pin-sized hole may lead to serious injuries.
When searching for leaks, use suitable aids, e.g. a piece of cardboard to avoid injuries.
Keep body and face away from leaks.
Consult a doctor immediately if liquid has penetrated in the body. The liquid must be
removed from the body as quickly as possible.
Hot liquids
If hot liquids are drained, people may burn and/or scald themselves.
When draining hot consumables, wear personal protective equipment.
Before performing any repair, maintenance or cleaning work, allow liquids and machine
parts to cool off, if necessary.
Damaged compressor unit
Damaged compressed air hoses of compressor unit may tear off. Hoses that move
uncontrollably may hurt people seriously.
If it is suspected that the compressor unit is damaged, immediately contact a specialist
workshop.
Shut down and safeguard the machine, refer to page24.
Damaged hydraulic hoses
Damaged hydraulic hoses can tear off, burst or cause oil leaks. As a result, the machine may be
damaged and people may be seriously injured.
Shut down and safeguard the machine, refer to page24.
If it is suspected that hydraulic hoses are damaged, immediately contact a service centre,
Checking hydraulic hoses.
Hot surfaces
The following components may become hot during operation and may burn people:
• Transfer gearbox
• Mower gearbox
• Belt gearbox
• Hydraulic system
• Cutter bar
Maintain a sufficient distance from hot surfaces.
Leave machine parts to cool down and wear protective gloves.
To Next Page
Loading...
Need help?
General
