Krone EasyCut F 320 M - Page 68

13 Maintenance - Gearbox
13.2 Main gearbox
68
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
Change oil
ü A suitable container is available for escaping oil.
 Unscrew the locking screw from the inspection hole(1) and the locking screw from the filling
hole(3).
 Unscrew the oil drain plug(2) and drain the oil.
 Screw in the oil drain plug(2), tightening torque refer to page62.
 Refill with fresh oil up to the inspection hole (1) via the filling hole (3).
 Screw the locking screw into the inspection hole(1) and the locking screw into the filling
hole(3), tightening torque refer to page62.