Need help?Do you have a question about the KSB Calio S and is the answer not in the manual?
General| Type | Centrifugal Pump |
|---|---|
| Operating Pressure | 10 bar |
| Application | Heating, cooling |
| Power Supply | 1~230 V, 50 Hz |
| Temperature Range | -10 to +110 °C |
| Material | Cast iron, stainless steel |
| Connection | Threaded |
| Power Consumption | 0.37 kW to 1.5 kW |
Defines safety symbols and their associated hazard levels.
General safety precautions for operating the pump set.
Specifies the approved applications and limitations for the pump.
Critical safety rules to follow during installation.
Step-by-step instructions for physically installing the pump.
Procedures and precautions for connecting the pump to the piping system.
Instructions and safety warnings for electrical hook-up.
Detailed steps for connecting the electrical power cable.
Procedures for bringing the pump into operation.
Conditions that must be met before starting the pump.
Steps for filling and removing air from the pump.
Instructions for the initial startup of the pump.
Defines the acceptable operational parameters for the pump.
Describes the different operational modes of the pump.
Details the constant-pressure operating mode and its settings.
Explains the proportional-pressure control mode and how to set it.
Describes the open-loop control mode and speed settings.
Details the Dynamic Control function for optimizing performance.
Steps for safely disconnecting the pump from the system.
Detailed steps for disconnecting the power cable.
Provides a guide to diagnosing and resolving common pump issues.
To Next Page
