Need help?Do you have a question about the KSB CPK and is the answer not in the manual?
General| Series | CPK |
|---|---|
| Seal Type | Mechanical seal |
| Applications | Water supply, irrigation |
| Material | Cast iron, stainless steel |
| Impeller Material | Bronze, stainless steel |
| Speed | 2900 rpm |
| Connection Type | Flanged |
Method for ensuring accurate alignment between pump and motor.
Guidelines for connecting suction and discharge piping.
Essential preliminary steps before commissioning the pump.
Specification of oils for bearing bracket lubrication.
Details on shaft sealing mechanisms like stuffing boxes or mechanical seals.
Step-by-step guide for cutting and inserting packing rings.
Procedure for safely starting the pump, including valve operation.
Steps for safely stopping the pump and protecting it during shutdown.
Information on bearing types, lubrication, and quantities.
Essential safety precautions before starting any dismantling.
Table listing faults, their causes, and suggested remedies.
Specific cause-remedy pairings for common pump issues.
Comprehensive list of pump faults and their corrective actions.
To Next Page
