Need help?Do you have a question about the KSB Calio SI Series and is the answer not in the manual?
General| Max Pressure | 16 bar |
|---|---|
| Material | Cast iron, Stainless steel |
| Operating Mode | Continuous |
| Operating pressure | Up to 16 bar |
| Connection | Flange |
| Impeller Material | Bronze, stainless steel |
| Shaft Seal | Mechanical seal |
Defines safety symbols and general safety rules for operation and understanding hazards.
Covers intended use, personnel qualifications, training requirements, and child operation.
Consolidates safety for operators, maintenance, and prohibited operational methods.
Covers technical specifications, included items, accessories, and operating limits.
Critical safety rules and essential checks required before pump installation.
Procedures for physically installing the pump set in its location, considering orientation.
Covers enclosure, insulation, and safe electrical connections, including wiring.
Covers prerequisites, priming, venting, and initial start-up steps for the pump.
A guide to identify problems, causes, and remedies for common pump issues.
To Next Page
