KTM 1290 Super Duke R 2016 - Page 6

2 SETUP 4
L01506-01
– Tighten the controls on the right half of the handlebar.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, combination switch, right M5 3.5 Nm
(2.58 lbf ft)
(Super Duke R Special Edition)
– Remove the mounted clutch and brake levers.
V00184-01
– Unpack and mount the KTM PowerParts levers included in the delivery.
V00185-10
– Mount the clutch and brake lever protection.
– Check the throttle grip for smooth operation.
V00186-01
– Mount and tighten the rear mirror on both sides.