26 LIST OF SYMBOLS 179
26.1 Red symbols
Red symbols indicate an error condition that requires immediate intervention.
The immobilizer indicator lamp lights up or flashes red – Status or error message for immobilizer/alarm system
(optional).
26.2 Yellow and orange symbols
Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are also represented by yellow
or orange symbols.
Engine diagnosis warning lamp (MIL) lights up yellow – The OBD (on-board diagnosis) has detected an emission- or
safety-critical error.
The general warning lamp lights up yellow – An operating safety (warning) message was detected. This is also
shown in the info display.
26.3 Green and blue symbols
Green and blue symbols reflect information.
The turn signal indicator lamp flashes green simultaneously with the turn signal – The turn signal is switched on.
The idling speed indicator lamp lights up green – The transmission is in idle.
The high beam indicator lamp lights up blue – The high beam is switched on.
To Next Page
Loading...
Need help?
General
