Why aren't the brake light and horn working on my KTM 2008 1190 RC8 USA Motorcycle?
If the brake light and horn on your KTM Motorcycle do not work, the cause may be a blown fuse 3. In this case, you should change the fuses of individual power consumers.
Why does my KTM 2008 1190 RC8 USA Motorcycle start in gear?
If your KTM Motorcycle starts even when it is in gear, the safety start system may be defective. You should check the safety start system.
General| Year | 2008 |
|---|---|
| Manufacturer | KTM |
| Model | 1190 RC8 USA |
| Country | USA |
| Category | Motorcycle |
| Displacement | 1195 cc |
| Compression Ratio | 12.5:1 |
| Fuel System | Electronic Fuel Injection |
| Transmission | 6-speed |
| Rear Suspension | WP monoshock |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 190/55 ZR17 |
| Engine Type | V-twin |
| Power | 155 hp |
| Torque | 120 Nm (88.5 ft-lbs) @ 8000 rpm |
| Frame | Chromium-Molybdenum trellis frame, powder coated |
| Front Suspension | WP USD 43 mm |
| Front Brake | Dual 320 mm discs, 4-piston calipers |
| Rear Brake | Single 220 mm disc, 2-piston caliper |
| Wheelbase | 1425 mm (56.1 in) |
| Fuel Capacity | 16 liters |
Covers intended use, maintenance importance, warranty conditions, and part recommendations.
Description of clutch lever, hand brake lever, light switch, flasher switch, horn, and starter button.
Describes navigation and selection within the main settings menu.
Configuration options for shift light, lap count, and trip reset settings.
Allows enabling/disabling tire pressure and external temperature displays.
Procedure for selecting between Road and Race riding modes.
Details on setting the clock and configuring shift indicator RPMs.
General safety, usage advice, and protective gear recommendations for new riders.
Guidelines and recommended RPM limits for the engine break-in period.
Advice on maximum weight limits, luggage, and their effect on handling.
Essential checks to perform before starting any journey for safety.
Advice on proper gear shifting and general riding techniques.
Further advice on safe riding, handling, and warnings about vehicle conditions.
Guidance on safe braking, adapting to conditions, and brake system maintenance.
Safety precautions and steps for refueling the motorcycle's fuel tank.
List of scheduled maintenance tasks to be performed by authorized KTM service centers.
Continuation of scheduled maintenance tasks for authorized workshops.
List of additional service tasks recommended for authorized workshops.
Procedure for safely lifting the front of the motorcycle using a work stand.
Procedure for safely removing the front of the motorcycle from a work stand.
Procedure for safely lifting the rear of the motorcycle using a work stand.
Procedure for safely removing the rear of the motorcycle from a work stand.
General introduction to the options for adjusting the front fork and rear shock absorber.
Instructions for adjusting the compression damping on the front fork.
Instructions for adjusting the rebound damping on the front fork.
Instructions for adjusting the spring preload on the front fork.
Procedure for bleeding air from the front fork legs.
General information on shock absorber damping, including low and high speed ranges.
Instructions for adjusting the low-speed compression damping on the shock absorber.
Instructions for adjusting the high-speed compression damping on the shock absorber.
Instructions for adjusting the rebound damping on the shock absorber.
Information on the steering damper's function and how to adjust it.
Information and procedure for adjusting the front vehicle level via fork leg clamps.
Procedure for adjusting the vehicle level at the rear using the eccentric shaft.
Information on footrest adjustability and procedure for adjustment.
Procedure for programming and deactivating motorcycle ignition keys.
Procedure to check the engine oil level at normal operating temperature.
Procedure for draining engine oil, changing the oil filter, and cleaning the oil screen.
Procedure for safely removing the engine oil filter.
Procedure for correctly fitting the engine oil filter.
Instructions for topping up the engine oil level.
Common causes and actions for engine starting problems.
Diagnosing and resolving issues related to low engine power and overheating.
Explains the meaning of the EFI warning lamp (MIL) and related faults.
Troubleshooting for non-functional brake lights, horns, and blank instrument displays.
Lists flash codes from the immobilizer indicator lamp and their possible causes.
Lists flash codes from the EFI warning lamp (MIL) and their possible causes.
Procedures and precautions for preparing the motorcycle for winter storage.
Guidelines for storing the motorcycle for extended periods, including checks and temperature.
Procedures for putting the motorcycle back into operation after storage.
Lists recommended torque values for various engine mounting screws and nuts.
Lists recommended torque values for various chassis mounting screws and nuts.
To Next Page