Need help?Do you have a question about the KTM 1190 RC8 R Track and is the answer not in the manual?
General| Displacement | 1195 cc |
|---|---|
| Transmission | 6-speed |
| Front Suspension | WP USD 43 mm |
| Rear Suspension | WP monoshock |
| Tires (front) | 120/70 ZR 17 |
| Tires (rear) | 190/55 ZR 17 |
| Torque | 123 Nm at 8, 000 rpm |
| Cooling system | Liquid-cooled |
| Frame | Chromium-Molybdenum trellis frame, powder-coated |
| Front Brakes | Dual 320 mm discs, Brembo 4-piston calipers |
| Rear Brakes | Brembo 2-piston caliper, 220 mm disc |
| Fuel Capacity | 16.5 liters |
| Engine Type | V-Twin, 4-stroke, liquid-cooled |
| Fuel system | Keihin EFI with 52mm throttle bodies |
Explains the meaning of specific symbols used in the manual.
Explains the type formats used for names and trademarks.
Defines intended use, warranty conditions, and assembly procedures.
Covers environmental responsibility, risk classification, and manual importance.
Illustrates key components from front left and rear right views.
Details the location of VIN, engine, fork, shock absorber, and steering damper numbers.
Describes essential controls like levers, switches, and throttle grip.
Details instrument display, lamps, and handlebar buttons.
Explains ROAD/RACE modes, menus, and settings.
Guides through accessing and configuring the SET-UP menu.
Provides initial advice for new riders and engine running-in guidelines.
Details essential checks before riding and engine start procedures.
Explains the correct method for filling the fuel tank safely.
Outlines scheduled maintenance tasks and their intervals.
Explains adjustments for fork compression, rebound, and preload.
Covers steering damper adjustment and vehicle level settings.
Details adjustments for footrest position and handlebar height.
Procedures for safely lifting the motorcycle and removing parts.
Instructions for removing, installing, and cleaning the air filter.
Steps for removing and installing the fuel tank and exhaust cover.
Covers chain cleaning, tension checks, and adjustments.
How to check front and rear brake discs and linings for wear.
Procedures for checking and adding front and rear brake fluid.
Covers removal and installation of front and rear wheels.
Guidelines for checking tire condition, tread, and air pressure.
Instructions for battery removal, installation, and recharging.
Covers changing main and individual power consumer fuses.
Details coolant level checks and adding coolant to the system.
Covers adjusting throttle cable play and quick shifter settings.
Procedures for checking engine oil level and changing oil/filter.
Guidelines for cleaning the motorcycle and its components.
Covers storing the motorcycle and preparing it for use after storage.
Explains error codes indicated by the EFI warning lamp.
Provides engine data, capacities, and tightening torque values.
Lists torque specifications for engine components.
Details chassis, fork, and shock absorber specifications.
Lists torque specifications for chassis components.
Details fork part number, damping, and oil specifications.
Details shock absorber part number, damping, and oil specifications.
Provides schematics of the motorcycle's electrical system.
Details specifications for brake fluid, coolant, and engine oil.
Lists recommended products for air filter, chain, and cleaning.
Explains JASO T903 MA and SAE standards for oils.
To Next Page