CONTROLS 16
Press the
MODE button for 3 -
5 seconds.
The display of Trip 1, Time 1 and Avs 1 is reset
Press the
MODE button
briefly.
Next display mode
5.16Odometer menu, ODO/Trip 2
400579-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
• ROAD mode
Alternative 2
• The ignition is on.
• The motorcycle is being ridden.
• ROAD mode
– Press the MODE button briefly and repeatedly until ODO appears at the top left of
the info display.
ODO shows the total distance covered.
Trip 2 shows the distance covered since the last reset. For example, between two refu-
eling stops. Trip 2 is always running and counts up to 9999.9.
Time 2 shows the journey time on the basis of Trip 2 and resumes running as soon as a
speed signal is received.
The calculation of this value starts with the first speed signal and ends 3 seconds after
the last speed signal.
Avs 2 shows the average speed and is coupled with Trip 2 and Time 2.
Press the button . No function
Press the button . No function
Press the button
and the button
for 3 - 5 seconds.
The display changes to the SET‑UP menu
Press the
MODE button for 3 -
5 seconds.
The display of Trip 2, Time 2 and Avs 2 is reset
Press the
MODE button
briefly.
Next display mode
5.17FUELDISTANCE menu
401202-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
• ROAD mode
Alternative 2
• The ignition is on.
• The motorcycle is being ridden.
• ROAD mode
– Press the MODE button briefly and repeatedly until FUELDISTANCE appears at the top
of the info display.
TripFuel - No function
OuterTemp - No function
Tip
The OuterTemp display can be switched off in the OPTIONS menu.
OuterTemp then no longer appears on the info display.
Press the button . No function
Press the button . No function
To Next Page
Loading...
