Need help?Do you have a question about the KTM 250 EXC AUS 2010 and is the answer not in the manual?
General| Engine Type | Single cylinder, 2-stroke |
|---|---|
| Displacement | 249 cc |
| Bore x Stroke | 66.4 mm x 72 mm |
| Transmission | 6-speed |
| Fuel System | Keihin PWK 36 S AG |
| Ignition | Kokusan |
| Starter | Kickstarter |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Seat Height | 960 mm |
| Front Suspension | WP USD Ø 48 mm |
| Rear Suspension | WP PDS shock absorber |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Fuel Tank Capacity | 9.5 liters |
| Frame | Central double-cradle-type 25CrMo4 steel |
Explains symbols used in the manual to convey information.
Explains typographical formats and conventions used throughout the manual.
Defines intended use for EXC/SIX DAYS and XC-W/XC models, including road legality.
Importance of maintenance, warranty conditions, and using approved parts.
Critical safety advice, fire hazards, environmental impact, and risk level definitions.
Identifies key external components from different views.
Shows the location of chassis, engine, and other serial numbers.
Explains operation of levers, switches, speedometer, and dashboard functions.
Operation of fuel tap, filler cap, choke, kickstarter, side stand, and steering lock.
Crucial advice and safety precautions before the first ride.
Engine break-in procedure and vehicle prep for challenging terrains/temperatures.
General pre-ride checks, engine starting, and safety warnings.
Guidance on gear shifting, riding, and braking techniques.
Procedures for stopping, parking, and refueling the motorcycle safely.
List of maintenance tasks for authorized workshops and as additional order.
Routine checks and maintenance tasks for the owner.
Safe procedures for lifting and handling the motorcycle.
Adjusting fork/shock compression, rebound, sag, and spring preload.
Maintenance of chain, brake discs, linings, fluid levels, and wheels.
Maintenance of auxiliary springs, battery, fuses, lights, seat, fuel tank, and cooling system.
Troubleshooting for engine not starting, stalling, or overheating.
Troubleshooting for low power, poor acceleration, or idle problems.
Detailed engine parameters including displacement, bore, stroke, and transmission ratios.
Chassis, fork, shock absorber, wheel, brake, and weight specifications.
Carburetor settings and component details for various models.
Specified tightening torques for engine and chassis components.
Electrical wiring diagrams for various model configurations.
Specifications for brake fluid, coolant, engine oil, fork oil, and hydraulic fluid.
Recommended auxiliary substances for cleaning and maintenance.
Explanation of JASO and SAE standards related to oils.
To Next Page