14 ELECTRICAL SYSTEM 78
14.4 Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
– Use only fuses with the prescribed amperage. Never bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the seat.
Preparatory work
– Switch off all power consumers and switch off the engine.
– Remove the seat. ( p. 47)
102224-10
Main work
–
Pull the starter relay
from the holder.
102225-10
–
Remove protection caps
.
–
Remove the faulty main fuse
.
Info
A defective fuse is indicated by a burned-out fuse wire
.
A spare fuse
is located in the starter relay.
– Install a new main fuse.
Fuse (58011109110) ( p. 97)
– Check that the electrical equipment is functioning.
Tip
Insert the spare fuse so that it is available if needed.
– Mount the protection caps.
– Mount the starter relay onto the holder and lay the cable.
Finishing work
– Mount the seat. ( p. 48)
To Next Page
Loading...
Need help?
General
