ARBEITEN 3
13
3.8 Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
– Allow the voltage regulator to cool down before performing any work.
S05350-10
–
Remove screw
1
.
S05351-10
– Raise seat, pull it toward the fuel tank and take it off.
3.9 Mounting the seat
S05352-10
– Attach the seat to the collar bushings at the front and simulta-
neously push it back.
The holding lugs engage in the recesses at the back.
– Make sure the seat is latched in place correctly.
To Next Page
Loading...
Need help?
General
