ENGLISH
10
PERIODIC MAINTENANCE SCHEDULE 60 / 65 SX
Check transmission oil level ●●
Change transmission oil ●
Check spark plug and electrode gap ●
Check carburetor for tight fit on the intake flange ●●
Check intake manifold for leaks and cracks ●
Drain and clean carburetor float chamber ●●
Check idle setting when engine is warm ●
Check air filter, filter box and filter boot ●●
Check sprockets, chain guides and chain for wear ●●
Clean and lube chain ●●
Check chain tension ●●
Check coolant level ●●●
Check quality of antifreeze ●
Check cooling system for leaks - visual inspection ●●●
Check exhaust system for leaks ●
Check exhaust brackets ●●
Check brake fluid level ●●●
Change brake fluid ●
Check thickness of disc brake pads ●●●
Check brake discs for wear and wobbling ●
Check freeplay and operation of hand brake lever and foot brake lever ●●
Inspect condition and installation of brake hose ●●●
Check fork for function and tightness ●●
Service front fork completely ●
Check steering head bearing clearance / adjust ●●
Clean and grease steering head bearings ●
Check shock absorber for function and tightness ●●
Check bearings of swingarm for play ●
Clean and grease bearings of swingarm ●
Check tightness of spokes and rim join ●●
Check wheel bearings for clearance ●●
Check tire condition and air pressure ●●
Check cables for damage, correct instalment and easy working ●●
Lube and adjust cables ●●
Check all screws, nuts and hose clamps for proper tightness ●●
Grease or lube all pivot points and sliding components ●●
before each start
after washing
Service after
20 hours
once a year
KTM
rider
KTM
dealer
09. 99
To Next Page
