EasyManua.ls Logo

KTM 65 SX 2012 - Mounting the Seat; Removing the Air Filter; Installing the Air Filter

KTM 65 SX 2012
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE WORK ON THE CHASSIS 34
10.21Mounting the seat
300634-10
Hook the seat onto screw and lower the seat at the rear while pushing it forward.
Projection hooks into the fuel tank.
300633-11
Close quick release .
10.22Removing the air filter x
Note
Engine failureUnfiltered intake air has a negative effect on the service life of the engine.
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazardHazardous substances cause environmental damage.
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Remove the seat. ( p. 33)
700441-01
Unhook the air filter holder and swing it to the side. Remove the air filter with
the air filter support.
Remove the air filter from the air filter support.
10.23Installing the air filter x
100818-10
Mount the clean air filter onto the air filter support.
Grease the air filter in area .
Long-life grease ( p. 81)

Table of Contents

Related product manuals