MAINTENANCE WORK ON CHASSIS AND ENGINE 103
700170-11
– Fold the headlight mask up.
700169-11
– Position the headlight mask. Mount and tighten screws .
Guideline
Screw, headlight mask M6 5 Nm (3.7 lbf ft)
– Check the lighting function.
9.47Changing the low beam bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate due to the heat and be deposited on
the reflector.
– Switch off all power consumers and switch off the engine.
To Next Page
Loading...
Need help?
General
