14 ELECTRICAL SYSTEM 142
600612-10
–
Pull bulb socket
out of the reflector.
–
Pull parking light bulb
out of the bulb socket.
– Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) ( p. 187)
– Insert the bulb socket in the reflector.
– Insert the protection cap.
Finishing work
– Install the headlight mask with the headlight. ( p. 138)
– Check the headlight setting. ( p. 144)
14.11 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
To Next Page
Loading...
