EasyManua.ls Logo

KTM 690 Enduro R 2021 User Manual

KTM 690 Enduro R 2021
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER'S MANUAL 2021
690 ENDURO R
Art. no. 3214279en

Table of Contents

Other manuals for KTM 690 Enduro R 2021

Question and Answer IconNeed help?

Do you have a question about the KTM 690 Enduro R 2021 and is the answer not in the manual?

KTM 690 Enduro R 2021 Specifications

General IconGeneral
Engine TypeSingle cylinder, 4-stroke
Bore x Stroke105 mm x 80 mm
Transmission6-speed
Fuel SystemElectronic Fuel Injection
CoolingLiquid-cooled
Compression Ratio12.7:1
StarterElectric starter
Front Tire90/90-21
Rear Tire140/80-18
Seat Height910 mm
Power74 hp (55 kW) @ 8, 000 rpm
Torque73.5 Nm
FrameChromoly steel trellis frame
Front SuspensionWP XPLOR USD, 48 mm
Rear SuspensionWP XPLOR monoshock
Front BrakeSingle 300 mm disc
Rear BrakeSingle 240 mm disc
ABSBosch 9.1 MP (disengageable)
Front Wheel21 inch
Rear Wheel18 inch
Wheelbase1504 mm
Ground Clearance270 mm
Fuel Tank Capacity13.5 l
Dry Weight146 kg

Summary

Safety Advice

Intended Use and Misuse

Defines the intended use of the vehicle and describes actions that constitute misuse and potential dangers.

Risk Levels and Symbols

Explains risk levels (Danger, Warning, Caution, Note) and associated symbols for safety.

Safe Operation Practices

Covers rider fitness, environmental hazards, and burn dangers during operation.

Protective Clothing Requirements

Stresses the importance of wearing appropriate protective clothing for safety.

View of Vehicle

Front Left View Identification

Identifies key components on the front left view of the motorcycle with page references.

Rear Right View Identification

Identifies key components on the rear right view of the motorcycle with page references.

Controls Overview

Combination Switch Functions

Describes the combination switch for riding modes, traction control, and ABS.

Indicator Lamps Explained

Details the function of various warning and indicator lamps on the dashboard.

Side Stand Operation

Explains the side stand's location and its coupling with the safety starting system.

Preparing for First Use

Initial Use Recommendations

Offers crucial advice for initial vehicle use, including safety and controls familiarization.

Engine Break-In Procedure

Specifies the engine break-in procedure, including speed limits per gear.

Riding Instructions

Pre-Ride Checks and Maintenance

Lists essential checks before every trip to ensure roadworthiness.

Braking Techniques and Safety

Offers comprehensive advice on braking techniques, system checks, and safety.

Stopping and Parking Procedures

Covers procedures for safely stopping, parking, and securing the motorcycle.

Chassis Tuning

Adjusting Fork Compression Damping

Guides on adjusting fork compression damping for desired suspension behavior.

Adjusting Fork Rebound Damping

Explains how to adjust fork rebound damping for optimal suspension response.

Adjusting Shock Absorber Rebound

Explains how to adjust the shock absorber's rebound damping.

Chassis Service Work

Cleaning Fork Dust Boots

Describes cleaning fork dust boots to prevent seal leaks and maintain performance.

Air Filter Removal and Installation

Details how to remove and install the air filter and air filter box.

Chain Tension Checking

Covers how to check and set the correct chain tension, warning of issues.

Brake System

Anti-lock Braking System (ABS)

Explains the ABS system, its modes, and warnings about modifications.

Checking Front Brake Fluid

Explains how to check the front brake fluid level and warnings about low levels.

Changing Front Brake Linings

Guides on changing front brake linings with safety warnings.

Wheels and Tires

Front Wheel Removal

Details the procedure for removing the front wheel, including brake caliper adjustment.

Rear Wheel Installation

Guides on installing the rear wheel, including hub damping and spindle torque.

Checking Tire Pressure

Details how to check tire pressure for different riding conditions and loads.

Electrical System

12-V Battery Removal

Details the procedure and safety precautions for removing the 12-V battery.

Main Fuse Replacement

Details how to locate and replace the main fuse for the vehicle's electrical system.

Headlight Bulb Replacement

Explains how to replace the headlight bulb, with precautions for the reflector.

Cooling System

Checking Coolant and Antifreeze

Provides safety warnings and steps for checking coolant and antifreeze levels.

Filling and Bleeding Cooling System

Guides on refilling and bleeding the cooling system after draining.

Engine Tuning

Changing Riding Modes

Explains how to change riding modes (Street/Sport) via the MAP button.

Adjusting Traction Control

Details how to adjust and manage the traction control system.

Engine Service Work

Engine Oil Level Check

Guides on checking the engine oil level when the engine is warm.

Engine Oil and Filter Change

Details the process for changing engine oil and filter, including safety.

Cleaning and Care

Motorcycle Cleaning Procedures

Provides instructions for cleaning the motorcycle, including avoiding high pressure and using proper cleaners.

Winter Operation Maintenance

Outlines essential maintenance for protecting the motorcycle during winter storage.

Storage Procedures

Long-Term Storage Preparation

Lists steps for preparing the motorcycle for long-term storage, including fuel and battery care.

Preparing for Use After Storage

Details the procedure for getting the motorcycle ready after a storage period.

Technical Data

Engine Specifications

Provides detailed specifications for the motorcycle's engine.

Front Fork Specifications

Lists specifications and adjustment ranges for the front fork.

Shock Absorber Specifications

Lists specifications and adjustment ranges for the rear shock absorber.

Related product manuals