KTM 2014 690 Enduro R EU User Manual

OWNER'S MANUAL 2014
690 Enduro R EU
690 Enduro R AUS/UK
Art. no. 3213101en

KTM 2014 690 Enduro R EU Specifications

General

Bore x Stroke	102 mm x 84.5 mm
Transmission	6-speed
Front Tire	90/90-21
Rear Tire	140/80-18
Seat Height	910 mm
Starter	Electric starter
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Ground Clearance	280 mm
Engine Type	Single cylinder, 4-stroke
Displacement	690 cc
Power	67 hp (49.5 kW)
Fuel System	Electronic fuel injection
Cooling System	Liquid-cooled
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP Suspension
Front Brake	Single 300 mm disc
Rear Brake	Single 240 mm disc
Fuel Capacity	12 liters
Clutch	hydraulically operated

Summary

Safety Advice

Intended Use of the Motorcycle

General Safety Instructions

Highlights the importance of following safety instructions and checking vehicle warning labels.

Risk Degrees and Symbols

Safe Operation: Avoiding Impairment

Advises against operating the vehicle under the influence of alcohol, drugs, or impairment.

Safe Operation: Exhaust Gas Hazard

Warns about exhaust gases and emphasizes the need for proper ventilation.

Safe Operation: Handling Hot Components

Cautioning about hot vehicle components and advising to let them cool before work.

Protective Clothing Requirements

Emphasizes wearing appropriate protective clothing for riding to minimize injury risk.

Serial Numbers Identification

Motorcycle Controls

Clutch Lever Operation

Describes the clutch lever on the left handlebar, its hydraulic operation, and self-adjustment.

Hand Brake Lever Operation

Explains the hand brake lever on the right handlebar which operates the front brake.

Throttle Grip Function

Details the throttle grip located on the right side of the handlebar.

Horn Button Operation

Light Switch Functions

Turn Signal Switch Operation

Emergency OFF Switch Function

Describes the emergency OFF switch on the right handlebar for interrupting the ignition circuit.

Electric Starter Button Operation

Explains the electric starter button on the right handlebar and its basic/pressed states.

Ignition and Steering Lock

Details the ignition lock positions (OFF, ON, Steering locked) and key removal.

Combination Instrument

Combination Instrument Overview

Provides an overview of the combination instrument and its four function areas.

Combination Instrument Buttons

Explains the MODE, SET, and ABS buttons for display changes and ABS control.

Tachometer Functionality

Describes the tachometer showing engine speed in RPM and the red marking for the excess speed range.

Indicator Lamp Meanings

Details the various indicator lamps (turn signal, oil, fuel, ABS, etc.) and their states.

Display Functionality and Length

Explains the display segments lighting up on ignition and the wheel circumference (Length) display.

Speed Display Units

Shows speed in kilometers per hour (km/h) or miles per hour (mph).

Setting Speed Units (km/h or mph)

Time Display

Setting the Clock Time

ODO Display

Explains the ODO display shows total distance traveled, retained even after battery disconnection.

TRIP 1 Display: Setting and Resetting

TRIP 2 Display: Setting and Resetting

TRIP F Display for Fuel Reserve

GEAr Display for Engaged Gear

Coolant Temperature Indicator

Describes the 12-bar display for coolant temperature and warning lamp indication.

Opening the Fuel Filler Cap

Closing the Fuel Filler Cap

Shift Lever Location

Indicates the shift lever is mounted on the left side of the engine.

Foot Brake Lever Location

Describes the foot brake lever located in front of the right footrest for the rear brake.

Side Stand Operation and Safety

Explains the side stand's use for parking and its coupling with the safety starting system.

Preparing for Use

First Use Recommendations and Warnings

Covers initial use advice, safety warnings regarding impairment, clothing, tires, and handling.

Engine Running-In Procedure

Details the running-in phase, advising against exceeding specified engine speeds.

Vehicle Loading Guidelines and Warnings

Covers warnings about unstable handling due to load, incorrect mounting, high speed, and suitcase system risks.

Riding Instructions

Pre-Ride Checks and Vehicle Care

Lists essential checks before riding, including oil, brakes, coolant, tires, and electrical equipment.

Motorcycle Starting Procedure

Details the starting procedure, including safety warnings about exhaust gases, battery, and engine warmup.

Starting: Switching Off ABS Manually

Starting Off from a Standstill

Describes the procedure for engaging first gear, releasing the clutch, and opening the throttle.

Shifting Gears and Riding Safely

Covers shifting, riding, and warnings about abrupt load changes, downshifting, ignition position, and passenger safety.

Braking Procedures and Warnings

Provides braking instructions and warnings about wet/dirty brakes, spongy pressure, and brake system failure.

Stopping and Parking Procedures

Covers stopping, parking, security against unauthorized use, and handling hot components.

Refueling Procedures and Safety

Details refueling safety warnings (fire, poisoning) and procedures for opening/closing the filler cap.

Service Schedule

Scheduled Maintenance Intervals

Outlines required checks and maintenance tasks at different mileage/time intervals.

Tuning the Chassis

Fork and Shock Absorber Adaptation

Adjusting Front Fork Compression Damping

Describes how to adjust the front fork's compression damping using the white adjusting screw.

Adjusting Front Fork Rebound Damping

Details how to adjust front fork rebound damping using the red adjusting screw.

Shock Absorber Compression Damping

Adjusting Low-Speed Shock Absorber Compression

Describes adjusting low-speed compression damping for slow/normal shock absorber compression.

Adjusting High-Speed Shock Absorber Compression

Details adjusting high-speed compression damping for fast shock absorber compression.

Adjusting Shock Absorber Rebound Damping

Explains adjusting shock absorber rebound damping using clicks.

Measuring Unloaded Rear Wheel Sag

Checking Static Sag of Shock Absorber

Checking Riding Sag of Shock Absorber

Adjusting Shock Absorber Spring Preload

Provides instructions for adjusting spring preload, with safety warnings about pressurized parts.

Adjusting Riding Sag

Details the procedure for adjusting riding sag, including choosing and mounting a suitable spring.

Service Work on the Chassis

Checking Steering Head Bearing Play

Explains how to check for play in the steering head bearing and the risks of riding with play.

Adjusting Play of Steering Head Bearing

Provides instructions for adjusting steering head bearing play and checking for noticeable clicks.

Removing the Air Filter

Installing the Air Filter

Cleaning the Drive Chain

Checking Drive Chain Tension

Explains the importance of correct chain tension and warnings about taut or loose chains.

Adjusting Drive Chain Tension

Details adjusting chain tension by turning adjusting screws and aligning wheel markings.

Checking Chain, Sprockets, and Chain Guide

Adjusting Clutch Lever Position

Checking Hydraulic Clutch Fluid Level

Brake System

ABS System Function and Limitations

Explains the ABS unit, wheel speed sensors, functional limitations, and safety system aspects.

Adjusting Hand Brake Lever Position

Checking Brake Disc Thickness and Condition

Details checking brake disc thickness, wear limits, and for damage like cracks or deformation.

Checking Front Brake Fluid Level

Topping Up Front Brake Fluid

Checking Front Brake Linings

Changing Front Brake Linings

Provides instructions for changing front brake linings, with warnings about system failure and fluid types.

Checking Foot Brake Lever Free Travel

Adjusting Foot Brake Lever Position

Checking Rear Brake Fluid Level

Adding Rear Brake Fluid

Checking Rear Brake Linings

Changing Rear Brake Linings

Provides instructions for changing rear brake linings, with warnings about system failure.

Wheels and Tires

Removing the Front Wheel

Installing the Front Wheel

Removing Rear Wheel

Installing the Rear Wheel

Checking Tire Condition

Checking Tire Air Pressure

Electrical System

Removing the Battery

Installing the Battery

Recharging the Battery

Changing the Main Fuse

Explains how to change the main fuse, identifying its location and warnings about wrong fuses.

Changing the ABS Fuses

Details changing ABS fuses, locating them, and warnings about system overload.

Changing Fuses for Individual Power Consumers

Changing the Headlight Bulb

Checking the Headlight Setting

Adjusting the Headlight Range

Cooling System

Cooling System Operation

Checking Antifreeze and Coolant Level

Provides warnings about hot coolant and detailed instructions for checking antifreeze and coolant levels.

Checking Coolant Level

Details checking coolant level in the radiator and compensating tank, with correction procedures.

Draining the Coolant

Filling/Bleeding the Cooling System

Details filling and bleeding the cooling system, with warnings about coolant poisoning and exhaust gases.

Tuning the Engine

Adjusting Engine Characteristic (Map Selection)

Adjusting Shift Lever Basic Position

Service Work on the Engine

Checking Engine Oil Level

Explains how to check engine oil level when the engine is warm using the oil level viewer.

Changing Engine Oil, Filter, and Oil Screens

Outlines the procedure for changing engine oil, filter, and cleaning oil screens, with warnings.

Draining the Engine Oil

Removing the Oil Filter

Cleaning the Oil Screens

Installing the Oil Filter

Filling Up with Engine Oil

Explains how to add engine oil, specifying types and quantities, with info on optimal performance.

Adding Engine Oil

Details adding engine oil, specifying types and quantities, with warnings about premature wear.

Technical Data

Engine Specifications

Engine Tightening Torques

Engine Oil Capacity

Coolant Capacity

Fuel Capacity

Electrical System Specifications

Tire Specifications

Fork Specifications

Shock Absorber Specifications

Chassis Tightening Torques

Substances