Need help?Do you have a question about the KTM 690 SMC R 2014 and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke |
|---|---|
| Displacement | 690 cc |
| Bore x Stroke | 102 mm x 84.5 mm |
| Compression Ratio | 12.6:1 |
| Fuel System | Electronic fuel injection |
| Lubrication | Forced oil lubrication with 2 oil pumps |
| Transmission | 6-speed |
| Final Drive | Chain |
| Subframe | Aluminum |
| Rear Suspension | WP monoshock |
| Suspension Travel Front | 250 mm |
| Suspension Travel Rear | 250 mm |
| Tires Front | 120/70 ZR17 |
| Tires Rear | 160/60 ZR 17 |
| Steering Head Angle | 63.5° |
| Seat Height | 890 mm |
| Tank Capacity | 12 L |
| Starter | Electric starter |
| Power | 67 hp |
| Cooling | Liquid cooled |
| Primary Drive | Gear |
| Frame | Steel trellis frame |
| Handlebar | Aluminum |
| Front Suspension | WP USD 48 mm |
| Front Brake | Brembo 4-piston fixed caliper, brake disc Ø 320 mm |
| Rear Brake | Single disc, 240 mm |
| ABS | Bosch 9M+ two-channel ABS (disengageable) |
| Wheels Front | 3.50 x 17" |
| Wheels Rear | 5.00 x 17" |
| Chain | X-ring 5/8 x 1/4" |
| Clutch | Wet multi-disc clutch, hydraulically operated |
Explains the meaning of various symbols used in the manual.
Defines the intended purpose and operational scope of the KTM motorcycle.
Provides essential guidelines and instructions for safe operation of the vehicle.
Outlines critical safety procedures for operating the motorcycle.
Emphasizes the importance of wearing appropriate protective gear for riding.
Provides information on recommended fluids and their proper handling.
Stresses the necessity of proper service for optimal operation and wear prevention.
Illustrates the motorcycle's front left side with numbered components.
Indicates the location where the chassis number is stamped on the vehicle.
Shows the location where the engine number is stamped on the engine.
Describes the clutch lever on the left handlebar and its operation.
Details the hand brake lever on the right handlebar and its function.
Explains the location and function of the throttle grip on the right handlebar.
Describes the light switch on the left handlebar and its beam settings.
Explains the function of the emergency OFF switch on the right handlebar.
Introduces the instrument cluster, its overview, and functional areas.
Offers crucial advice and warnings for the initial use of the motorcycle.
Provides guidelines for the engine break-in period to ensure longevity.
Lists essential pre-ride checks and maintenance steps for vehicle readiness.
Details the procedure for starting the motorcycle safely, including warnings.
Provides comprehensive instructions on braking, including ABS and potential issues.
Presents a detailed schedule of maintenance tasks at specified intervals.
Explains how to adjust the fork's compression damping for optimal performance.
Details the process for adjusting the fork's rebound damping.
Guides on adjusting the low-speed compression damping of the rear shock absorber.
Provides instructions for adjusting the shock absorber's rebound damping.
Describes the procedure for cleaning the fork leg dust boots.
Provides instructions for removing the air filter.
Details the process for cleaning the drive chain.
Explains how to check and ensure correct drive chain tension.
Explains the ABS system, its function, and limitations.
Provides instructions for adding front brake fluid safely.
Explains how to check the minimum thickness and condition of front brake linings.
Details how to check the rear brake fluid level and associated warnings.
Provides a step-by-step guide for removing the front wheel.
Details the procedure for correctly installing the front wheel.
Details how to inspect tires for damage, tread depth, and age.
Provides instructions and specifications for checking tire air pressure.
Guides on safely removing the motorcycle battery, including warnings.
Explains how to safely change the main fuse and its location.
Provides instructions for replacing the main headlight bulb.
Describes how to check the correct alignment of the headlight beam.
Details how to check coolant level and antifreeze protection, with safety warnings.
Outlines the procedure for safely draining the motorcycle's coolant.
Explains how to adjust engine performance maps using the Map-Select switch.
Details the procedure for checking engine oil level when the engine is warm.
Outlines the complete process for engine oil and filter change.
Provides guidelines for cleaning the motorcycle, including precautions.
Outlines specific checks and maintenance for winter storage or use.
Details the necessary steps for storing the motorcycle for extended periods.
Guides on recommissioning the motorcycle after a storage period.
Lists detailed technical specifications for the motorcycle's engine.
Provides torque specifications for various engine component screws and nuts.
Lists torque specifications for various chassis screws and fasteners.
Lists specifications and recommended suppliers for SAE 10W/60 engine oil.
Defines the required fuel grade and standards.
Recommends a specific product for cleaning the drive chain.
Recommends a specific product for cleaning the motorcycle.
Explains the JASO T903 MA standard for 4-stroke motorcycle engine oils.
To Next Page