13 WHEELS, TIRES 104
102001-01
–
Pull out wheel spindle
to the point where the chain adjuster is no longer in contact
with the adjusting screw.
– Push the rear wheel forwards as far as possible and take the chain off the rear sprocket.
– Pull out the wheel spindle.
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
– Always lay the wheel down in such a way that the brake discs are not dam-
aged.
– Take the rear wheel out of the swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
13.4 Installing the rear wheel x
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
– After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
–
Check the rear hub rubber dampers. x ( p. 106)