Need help?Do you have a question about the KTM 690 SMC R 2021 and is the answer not in the manual?
General| Displacement | 692.7 cm³ |
|---|---|
| Bore x Stroke | 105 mm x 80 mm |
| Power | 55 kW (74 hp) |
| Torque | 73.5 Nm |
| Compression Ratio | 12.7:1 |
| Starter | Electric starter |
| Transmission | 6-speed |
| Fuel System | Electronic Fuel Injection |
| Cooling | Liquid cooled |
| Lubrication | Forced oil lubrication with 2 oil pumps |
| Frame | Chromium-Molybdenum steel trellis frame, powder coated |
| Front Suspension | WP APEX 48 |
| Rear Suspension | WP APEX with Pro-Lever linkage |
| Front Wheel | 3.50 x 17" |
| Rear Wheel | 5.00 x 17" |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 160/60 ZR 17 |
| Seat Height | 890 mm |
| Ground Clearance | 237 mm |
| Fuel Tank Capacity | 13.5 liters |
| Engine Type | Single cylinder, 4-stroke |
| Front Brake | Brembo four piston radial caliper, brake disc |
| Rear Brake | Brembo single-piston floating calliper, brake disc |
| ABS | Bosch 9.1 MP (incl. Supermoto ABS) |
| Weight (without fuel) | 147 kg |
Explains the meaning of various symbols used in the document for clear communication.
Details typographical formats like proprietary names and underlined terms for document understanding.
Describes how to enable vehicle electronics from transport mode for operation.
Identifies the location of the diagnostics connector under the engine electronics control unit.
Provides step-by-step instructions for unpacking the vehicle and initial setup.
Details the procedure for safely removing the motorcycle seat.
Provides steps for correctly mounting the motorcycle seat.
Outlines the process for safely removing the 12-V battery from the motorcycle.
Explains how to safely disconnect the negative and positive terminals of the 12-V battery.
Details the steps for correctly connecting the 12-V battery terminals and securing them.
Provides instructions and guidelines for charging the 12-V battery safely and effectively.
Outlines the procedure for installing the 12-V battery into the battery compartment.
Describes how to safely open the fuel tank filler cap to access the fuel tank.
Explains the procedure for correctly closing the fuel tank filler cap after refueling.
Details the steps for removing the rear fairing from the motorcycle.
Provides instructions for removing the side cover from the motorcycle.
Outlines the procedure for removing the left rear side cover.
Outlines the procedure for removing the right rear side cover.
Details the steps for installing the left rear side cover.
Details the steps for installing the right rear side cover.
Provides instructions for mounting the side cover onto the motorcycle.
Details the procedure for fitting the rear fairing onto the motorcycle.
Explains how to mount the rear footrest bracket on both sides of the motorcycle.
Details the procedure for mounting the heel protector on the motorcycle.
Provides essential safety instructions and guidelines for refueling the motorcycle.
Guides the user through the process of setting the motorcycle's clock.
Explains how to change the unit display between kilometers and miles.
Lists specific torque values for various chassis screws and fasteners.
To Next Page