KTM 690 SMC R 2021 - Removing the rear fairing; Take off the side cover

WORK 3
13
3.10 Removing the rear fairing
Preparatory work
– Open the fuel tank filler cap. ( p. 12)
– Remove the seat. ( p. 8)
D07483-10
Main work
–
Remove screws
1
with the bushings.
–
Remove screws
2
and take off the grab handle.
D07484-10
–
Remove screw
3
.
– Take off the rear fairing.
Finishing work
– Close the fuel tank filler cap. ( p. 12)
3.11 Take off the side cover
Preparatory work
– Open the fuel tank filler cap. ( p. 12)
– Remove the seat. ( p. 8)
S03283-10
Main work
– Remove the left side cover from the rubber bushing in area
A
.
– Remove the left side cover upwards from the bushing in area
B
.
– Take off the left side cover from the front.
– Repeat these steps on the opposite side.