EasyManua.ls Logo

KTM 690 SMC 2008 User Manual

KTM 690 SMC 2008
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SETUP INSTRUCTIONS 2008
Packaging5
690SMCEU
690SMCAUS/UK
690SMCUSA
ART. NO. 3211383en
Question and Answer IconNeed help?

Do you have a question about the KTM 690 SMC 2008 and is the answer not in the manual?

KTM 690 SMC 2008 Specifications

General IconGeneral
Engine TypeSingle cylinder, 4-stroke
Displacement654 cc
Bore x Stroke102 mm x 80 mm
Compression Ratio11.8:1
Cooling SystemLiquid cooled
Transmission6-speed
Front BrakesSingle 320 mm disc, 4-piston caliper
Rear BrakesSingle 240 mm disc, 1-piston caliper
Front Tire120/70 ZR17
Rear Tire160/60 ZR17
Dry Weight139 kg
Fuel Capacity12 liters
Seat Height890 mm
StarterElectric
LubricationPressure lubrication with 2 Eaton pumps
ABSNot available
Front Wheel3.50 x 17"
Rear Wheel5.00 x 17"
Power46 kW (63 hp) at 7500 rpm
Fuel SystemKeihin EFI
Front SuspensionWP USD Ø 48 mm
Rear SuspensionWP shock absorber
Clutchhydraulically operated
FrameChromium-Molybdenum trellis frame, powder-coated
Torque65 Nm @ 6, 500 rpm

Summary

INTRODUCTION

MEANS OF REPRESENTATION

Symbols Used in Manual

Explains symbols used in the manual for indicating expected or unexpected reactions and references.

Typographical Formats

Details typographical formats, including proprietary names and trademarks, used within the document.

SET-UP

Vehicle Unpacking and Initial Setup

Step-by-step guide for unpacking the motorcycle and performing initial setup procedures before use.

2-Seater Operation Setup

Instructions for configuring the motorcycle for operation with a passenger (2-seater).

1-Seater Operation Setup

Procedures for setting up the motorcycle for single-rider use, as requested by the customer.

WORK

Seat Removal Procedure

Detailed steps for safely removing the motorcycle's seat.

Seat Installation Procedure

Instructions for correctly mounting and securing the motorcycle seat.

Battery Removal Guide

Steps for safely disconnecting and removing the motorcycle battery.

Battery Recharging Instructions

Guidance on how to safely charge the motorcycle's battery using a battery charger.

Battery Installation Guide

Procedure for correctly installing the motorcycle battery into its designated rack.

Fuel Filler Cap Operation

Instructions for opening and closing the motorcycle's fuel filler cap.

Rear Fairing Removal

Steps required to safely remove the rear fairing section of the motorcycle.

Rear Fairing Installation

Procedure for fitting and securing the rear fairing and related components.

Rear Footrest Bracket Installation

Steps for mounting the rear footrest bracket for passenger use.

Heel Protector Installation

Instructions for fitting the heel protector for single-rider configuration.

Motorcycle Refueling Procedure

Guide on safely refueling the motorcycle, including fuel type and measurement specifications.

Clock Setting Procedure

Instructions for setting the motorcycle's internal clock time.

Distance Unit Setting

How to change the unit of distance measurement between kilometers and miles.

TECHNICAL DATA - CHASSIS TIGHTENING TORQUES

SUBSTANCES

Related product manuals