14 ELECTRICAL SYSTEM 127
600611-10
–
Detach spring bar
.
–
Remove headlight bulb
.
– Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) ( p. 174)
– Fix the headlight bulb in the headlight using the spring bar.
– Mount the protection cap. Attach the connector.
Finishing work
– Install the headlight mask with the headlight. ( p. 124)
– Check the headlight setting. ( p. 130)
14.10 Changing the parking light bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
– Switch off all power consumers and switch off the engine.
– Remove the headlight mask with the headlight. ( p. 123)
To Next Page
Loading...
