KTM 690 SMC R 2014 - Installing the Oil Filter; Filling up with Engine Oil

17 SERVICE WORK ON THE ENGINE 148
17.6 Installing the oil filter x
102022-10
–
Insert oil filters

and

.
–
Oil the O-rings of the oil filter covers. Mount oil filter covers

and

.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M5x16 6 Nm (4.4 lbf ft)
17.7 Filling up with engine oil x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
0
0
1
1
401955-10
Main work
–
Remove filler plug with O-ring

from the clutch cover and add engine oil.
Engine oil 1.70 l (1.8 qt.) Engine oil (SAE 10W/60)
(00062010035) ( p. 182)
Alternative engine
oil
Engine oil
(SAE 10W/50)
( p. 182)
–
Refit plug with O-ring

and tighten it.