Name: KTM 690 SMC R 2014
Brand: KTM
Rating: 4 (1 reviews)

To Next Page

To Previous Page

16 TUNING THE ENGINE 141

401951-10

–

Clean gear teeth



of the shift lever and shift shaft.

– Mount the shift lever on the shift shaft in the required position and engage the gearing.

Info

The range of adjustment is limited.

The shift lever must not come into contact with any other vehicle components

during the shift procedure.

– Mount and tighten the screw.

Guideline

Screw, shift lever M6 14 Nm

(10.3 lbf ft)

Loctite

243™

Default Chapter5
- Table of Contents5
1 Meansofrepresentation9
- Means of Representation9
  - Symbols Used9
  - Formats Used9
2 Safety Advice10
- Use Definition - Intended Use10
- Degrees of Risk and Symbols11
- Tampering Warning11
- Safe Operation12
- Protective Clothing13
- Work Rules13
- Environment13
- Owner's Manual14
3 Important Information15
- Guarantee, Warranty15
- Operating and Auxiliary Substances15
- Spare Parts, Accessories15
- Service15
- Figures16
- Customer Service16
4 View of Vehicle18
- View of Vehicle, Front Left Side (Example)18
- View of Vehicle, Rear Right Side (Example)20
5 Serial Numbers22
- Chassis Number22
- Type Label22
- Key Number23
- Engine Number23
- Fork Part Number24
- Shock Absorber Part Number24
6 Controls25
- Clutch Lever25
- Hand Brake Lever25
- Throttle Grip26
- Horn Button26
- Light Switch27
- Turn Signal Switch27
- Emergency off Switch28
- Electric Starter Button28
- Ignition/Steering Lock29
- Combination Instrument29
- Overview29
- Function Buttons30
- Tachometer30
- Indicator Lamps31
- Display32
- Speed Display33
- Setting Kilometers or Miles33
- Time34
- Setting the Clock34
- 6.10.10 ODO Display35
- Setting/Resetting Display TRIP 135
- Setting/Resetting Display TRIP 236
- 6.10.13 TRIP F Display37
- 6.10.14 Gear Display37
- 6.10.15 Coolant Temperature Indicator38
- Opening the Filler Cap38
- Closing Filler Cap39
- Seat Release40
- Handrails40
- Passenger Footrests41
- Shift Lever41
- Foot Brake Lever42
- Side Stand43
7 Preparing for Use44
- Advice on First Use44
- Running in the Engine45
- Loading the Vehicle46
8 Riding Instructions48
- Performing Checks and Vehicle Care When Preparing for Use48
- Starting49
- Starting off51
- Shifting, Riding51
- Braking54
- Stopping, Parking56
- Transport57
- Refueling58
9 Service Schedule61
10 Tuning the Chassis64
- Fork/Shock Absorber64
- Adjusting the Compression Damping of the Fork64
- Adjusting the Rebound Damping of the Fork65
- Compression Damping of the Shock Absorber66
- Adjusting the Low-Speed Compression Damping of the Shock Absorber66
- Adjusting the High-Speed Compression Damping of the Shock Absorber67
- Adjusting the Rebound Damping of the Shock Absorber68
- Handlebar Position69
- Adjusting the Handlebar Position70
11 Service Work on the Chassis71
- Raising the Motorcycle with a Lift Stand71
- Removing the Motorcycle from the Lift Stand71
- Raising the Motorcycle with the Rear Wheel Stand72
- Taking the Motorcycle off of the Rear Wheel Stand73
- Raising the Motorcycle with the Front Wheel Stand73
- Taking the Motorcycle off of the Front Wheel Stand74
- Cleaning the Dust Boots of the Fork Legs74
- Removing the Fork Protector76
- Installing the Fork Protector76
- Removing the Seat77
- Mounting the Seat77
- Removing the Air Filter78
- Installing the Air Filter79
- Checking the Chain for Dirt80
- Cleaning the Chain80
- Checking the Chain Tension81
- Adjusting the Chain Tension83
- Checking the Chain, Rear Sprocket, Engine Sprocket, and Chain Guide84
- Adjusting Basic Position of Clutch Lever88
- Checking/Rectifying the Fluid Level of the Hydraulic Clutch89
12 Brake System90
- Abs/Antilock Brake System90
- Adjusting the Basic Position of the Hand Brake Lever91
- Checking the Brake Discs92
- Checking Brake Fluid Level of Front Brake93
- Adding Front Brake Fluid93
- Checking the Front Brake Linings95
- Checking the Free Travel of Foot Brake Lever96
- Adjusting the Basic Position of the Foot Brake Lever97
- Checking Rear Brake Fluid Level98
- Adding Rear Brake Fluid98
- Checking the Rear Brake Linings100
13 Wheels, Tires102
- Removing Front Wheel102
- Installing the Front Wheel103
- Removing Rear Wheel105
- Installing the Rear Wheel106
- Checking the Rear Hub Rubber Dampers108
- Checking the Tire Condition110
- Tubeless Tire System112
- Checking the Tire Air Pressure112
- Checking the Spoke Tension113
14 Electrical System115
- Removing the Battery115
- Installing the Battery116
- Recharging the Battery117
15 Cooling System134
- Checking the Antifreeze and Coolant Level134
- Checking the Coolant Level136
- Draining the Coolant138
- Filling/Bleeding the Cooling System139
16 Tuning the Engine141
- Adjusting the Engine Characteristic141
- Checking the Basic Position of the Shift Lever142
- Adjusting the Basic Position of the Shift Lever142
- Service Work on the Engine144
- Checking the Engine Oil Level144
- Changing the Engine Oil and Filter, Cleaning the Oil Screens145
- Draining the Engine Oil145
- Removing the Oil Filter146
- Cleaning the Oil Screens148
- Installing the Oil Filter150
- Filling up with Engine Oil150
- Adding Engine Oil151
18 Cleaning, Care153
- Cleaning the Motorcycle153
- Checks and Maintenance Steps for Winter Operation155
19 Storage157
- Preparing for Use after Storage159
20 Troubleshooting160
21 Blink Code163
22 Technical Data169
- Engine169
- Engine Tightening Torques170
- Capacities173
- Engine Oil173
- Coolant174
- Fuel174
- Chassis174
- Electrical System175
- Tires176
- Fork176
- Shock Absorber177
- Chassis Tightening Torques178
23 Substances183
- Auxiliary Substances187
- Standards189
- Index190

KTM 690 SMC R 2014 User Manual

Table of Contents

Questions and Answers:

KTM 690 SMC R 2014 Specifications

Related product manuals

Brand	KTM
Model	690 SMC R 2014
Category	Motorcycle
Language	English