KTM 790 DUKE 2018 User Manual

COMBINATION INSTRUMENT 7
73
7.13.16 Quick Selector 2
V01122-01
Condition
• The motorcycle is stationary.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until the Trips/Data menu is
marked on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until the Settings menu is marked
on the display. Press the SET button to open the menu.
– Press the UP or DOWN button until the Quick Selector 2 menu
is marked on the display. Press the SET button to open the
menu.
– Press the UP or DOWN button until the desired menu is
marked.
– Press the SET button to confirm the selection.
A menu can be defined for direct selection in the Quick Selec-
tor 2 menu.
When the menu is closed, the menu defined in Quick Selector 2 is
opened by pressing the DOWN button.
Info
In drive mode TRACK, the DOWN button can be used to set
the slip adjustment.

KTM 790 DUKE 2018 Specifications

General

Engine Type	Liquid-cooled, 4-stroke, parallel twin
Displacement	799 cc
Bore x Stroke	88 mm x 65.7 mm
Compression Ratio	12.7:1
Starter	Electric
Transmission	6-speed
Front Tire	120/70 ZR 17
Rear Tire	180/55 ZR 17
Seat Height	825 mm
Dry Weight	169 kg
Power	105 hp (77 kW) @ 9, 000 rpm
Torque	87 Nm @ 8, 000 rpm
Fuel System	Electronic fuel injection
Frame	Steel trellis frame
Front Suspension	WP upside-down Ø 43 mm
Rear Suspension	WP monoshock
Front Brake	2 x 300 mm discs, 4-piston calipers
Rear Brake	240 mm disc, single-piston caliper
ABS	Bosch 9.1MP Two Channel ABS (incl. Cornering ABS and Supermoto mode)
Fuel Tank Capacity	14 liters