Why are the headlight and position light not functioning on my KTM RC 125 2019 Motorcycle?
- LleonardwestSep 9, 2025
If the headlight and position light are not working, it is likely that fuse 6 is blown. Replace the fuse.
Why are the headlight and position light not functioning on my KTM RC 125 2019 Motorcycle?
If the headlight and position light are not working, it is likely that fuse 6 is blown. Replace the fuse.
Displacement | 124.7 cc |
---|---|
Transmission | 6-speed |
Fuel System | Electronic Fuel Injection |
Seat Height | 820 mm |
Tires | Front: 110/70-17, Rear: 150/60-17 |
Bore x Stroke | 58 mm x 47.2 mm |
Clutch | Wet, multi-disc |
Frame | Steel trellis frame |
Rear Suspension | WP monoshock |
ABS | Yes |
Wheelbase | 1341 mm |
Engine Type | Single-cylinder, 4-stroke |
Power | 15 hp |
Torque | 12 Nm |
Brakes | Disc brakes |
Front Suspension | WP upside-down fork |
Front Brake | 300 mm disc |
Rear Brake | 230 mm disc |
Ignition System | Electronic |
Details the different degrees of risk and associated symbols for hazard identification.
Warns against tampering with vehicle systems and provides guidelines for safe riding.
Emphasizes the importance of wearing appropriate protective clothing for rider safety.
Details the clutch lever, hand brake lever, throttle grip, and horn button functions.
Explains the operation of light switches, flasher buttons, and turn signal switches.
Describes the emergency OFF switch and electric starter button functions.
Explains the function and operation of the shift lever and foot brake lever.
Details various indicator lamps, warning messages, and their meanings.
Guides on adjusting shift speed warning thresholds RPM1 and RPM2 for optimal gear changes.
Provides advice on initial preparations, rider fitness, protective gear, and tire choice.
Lists essential checks and maintenance measures before every trip for roadworthiness.
Guides on safely starting the engine and initiating movement from a standstill.
Explains proper shifting, riding techniques, load alterations, and braking.
Details how to apply brakes, handle weight, road salt, ABS, and engine braking.
Lists maintenance tasks required at specific intervals (e.g., 1000 km, 7500 km, 15000 km).
Lists recommended maintenance tasks at various intervals (e.g., 7500 km, 30000 km, 48 months).
Explains the ABS system, its function, and safety warnings related to its operation.
Guides on checking the engine oil level and adding oil if necessary.
Provides instructions for changing the engine oil, oil filter, and cleaning the oil screen.
Addresses common problems like engine not cranking or not starting.
Troubleshoots issues like low power, overheating, and malfunction indicator lamp.