18 SERVICE WORK ON THE ENGINE 159
Info
Drain the engine oil only when the engine is warm.
Preparatory work
– Remove the right side cover. ( p. 101)
– Remove the left side cover. ( p. 98)
– Remove the front spoiler. ( p. 94)
– Stand the motorcycle on its side stand on a horizontal surface.
L02168-10
Main work
– Place a suitable container under the motor.
–
Remove the oil drain plug
with the O-ring.
–
Remove oil screen
with the O-ring.
– Completely drain the engine oil.
– Clean the oil drain plug and oil screen thoroughly.
–
Position oil screen
and mount and tighten oil drain plug
with the O-ring.
Guideline
Oil drain plug (RC 125) M24x1.5 15 Nm
(11.1 lbf ft)
Oil drain plug (RC 200) M24x1.5 15 Nm
(11.1 lbf ft)
To Next Page
Loading...
