ENGINE
B2650HSDC, B3350HSDC, WSM
1-M10
Auto Regeneration Switch
Press the auto regeneration switch, and the Auto
Mode and Inhibit Mode changes alternately. The tractor
has been set to Inhibit Mode by default. When the main
key switch is turned ON, the tractor will be in the Inhibit
Mode. By pressing the auto regeneration switch, the
mode can be switched to the Auto Regeneration Mode.
9Y1210822ENM0014US0
Parked Regeneration Switch
Press the parked regeneration switch under the
specified condition, and the parked regeneration starts.
When an amount of PM more than specified has built
up in the DPF, it is possible to do the parked
regeneration.
9Y1210822ENM0015US0
DPF Inhibit Switch
When the engine is started, the Auto regeneration
mode is automatically activated.
When the DPF Inhibit switch is pushed after the
engine is started, Regeneration Inhibit mode is
activated.
9Y1210822ENM0024US0
(1) Auto Regeneration Switch
(1) Parked Regeneration Switch
(1) DPF Inhibit Switch
To Next Page
Loading...
Need help?
General
