GENERAL
EA330-E4, WSM
G-7
4. CHECK AND MAINTENANCE
[1] DAILY CHECK LIST
Checking Coolant Level (Daily)
• During operation or immediately after operation, coolant in
the radiator is extremely hot.
If the radiator cap is removed, hot water may gush out,
causing scalding. Open the radiator cap after the engine
has cooled.
1. Fill the radiator with tap or fresh water.
• Dirt or dust in the water will hinder water flow, impairing
cooling efficiency.
2. When draining coolant, open both the drain valve (2) and the
radiator cap (1). Water will drain even more completely if the
engine is shaken several times.
3. When there is a chance of freezing and no antifreeze is added
to coolant, drain it after every use.
4. Periodically remove the radiator net (3) and check to see if the
radiator fin may greatly lower cooling or pressurized water, do
not use anything hard like a screwdriver or a spatula which may
scratch the fin.
9Y1211018GEG0005US0
Checking Engine Oil Level (Daily)
• Engine should be on a level surface when oil level is
checked.
1. Pull out dipstick (1) and check oil level.
2. If necessary, add engine oil to bring oil level between the oil
level mark (2) on dipstick.
9Y1211018GEG0006US0
(1) Radiator Cap
(2) Drain Valve
(3) Radiator Net
A: OPEN
B: CLOSE
(1) Dipstick
(2) Oil Level Mark
(3) Oil Inlet
To Next Page
Loading...
