Kubota EA330-E4 Series - Tightening Torques for General Use Screws, Bolts and Nuts

ENGINE
EA330-E4, WSM
1-S12
[2] TIGHTENING TORQUES FOR GENERAL USE SCREWS, BOLTS
AND NUTS
If the tightening torque is not specified, refer to the table below for the none specified torques values.
9Y1211018ENS0004US0
Indication on
top of bolt
No-grade or 4T 7T
Indication on
top of nut
No-grade or 4T
Unit N·m kgf·m lbf·ft N·m kgf·m lbf·ft
M6 7.9 to 9.3 0.80 to 0.95 5.8 to 6.8 9.81 to 11.2 1.00 to 1.15 7.24 to 8.31
M8 18 to 20 1.8 to 2.1 13 to 15 24 to 27 2.4 to 2.8 18 to 20
M10 40 to 45 4.0 to 4.6 29 to 33 49 to 55 5.0 to 5.7 37 to 41
M12 63 to 72 6.4 to 7.4 47 to 53 78 to 90 7.9 to 9.2 58 to 66
KiSC issued 05, 2015 A