Kubota EA330-E4 Series - Page 94

ENGINE
EA330-E4, WSM
1-S29
Valve
1. Remove the valve caps (5).
2. Remove the valve spring collets (4) with a valve lifter (6).
3. Remove the valve spring retainers (3), valve springs (2) and
valves (1).
(When reassembling)
• Wash the valve stem and valve guide hole, and apply engine oil
sufficiently.
• After installing the valve spring collets, lightly tap the stem to
assure proper fit with a plastic hammer.
9Y1211018ENS0038US0
(1) Valve
(2) Valve Spring
(3) Valve Spring Retainer
(4) Valve Spring Collet
(5) Valve Cap
(6) Valve Lifter
KiSC issued 05, 2015 A