CHECKS BEFORE START16
3. Press the save switch (Switch 5), and the following
detailed screen shows up.
(1) Using the cursor move switches (Switch 2 and 3),
move up and down the items. The year/month/
day on Side (A) will be reordered.
(2) Using the item move switch (Switch 4), move the
cursor to Side (B). Select the "AM/PM" system or
the "24-hour" system.
(3) Press the save switch (Switch 5), and the new
settings will be made.
If the direction cursor switch (Switch 1) is pressed,
the previous settings will remain.
A Consult your KUBOTA dealer for details.
BLog Record
The log record helps you check the last 3-month operating
record of the machine. Take the following steps.
1. Set the starter key to the "RUN" position.
2. Press the direction cursor switch (Switch 1) to make
the menu appear onscreen.
3. Press the cursor move switches (Switch 2 and 3) to
select the log record. Fix this choice with the
save switch (Switch 5).
(1) Cursor move switch
(Switch 2 and 3)
(2) Item move switch (Switch 4)
(A) Year/month/day display
(B) Clock display
(1) Starter switch (A) "STOP"
(B) "RUN"
(C) "START"
(1) Direction cursor switch (Switch 1)
(2) Save switch (Switch 5)
(3) Cursor
(4) Cursor move switches (Switch 2 and 3)
(5) Item move switch (Switch 4)
To Next Page
Loading...
Need help?
General
