PERIODIC SERVICE128
BChecking Wheel Bolt Torque
To avoid personal injury or death:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them as follows.
BChecking Tie-rod Dust Cover
1. Check to see that dust covers are not damaged.
2. If dust covers are damaged, consult local KUBOTA
Dealer for this service.
A If dust covers are cracked, water and dust invade into
tie-rod and it will be early wear.
EVERY 100 HOURS
BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
N-m (kgf-m)
(1) (2) (3) (4)
166.7 to 196.1
(17.0 to 20.0)
260 to 304
(26.5 to 31.0)
343 to 402
(35.0 to 41.0)
(1) Dust cover
(1) Grease fitting (Front axle support)
To Next Page
Loading...
Need help?
General
