How to reduce stubble height in down crop with KUHN FC 4000 R?
If the stubble is too high in down crop when using your KUHN Farm Equipment, consider: * Lowering the cutting height by tilting the header forward. * Installing a different set of skids suitable for the conditions.
General| Brand | KUHN |
|---|---|
| Model | FC 4000 R |
| Category | Farm Equipment |
| Language | English |
Defines the specific and intended purposes for operating the FC 4000 mower conditioner.
Lists prohibited operations and activities to avoid when using the FC 4000 mower conditioner.
Provides fundamental safety principles and guidelines for operating the machine.
Offers specific safety precautions for operating the FC 4000 mower conditioner.
Procedure for attaching the FC 4000 mower to a tractor using a straight hitch.
Procedure for connecting and securing the PTO shaft to the tractor and mower.
Steps to attach the FC 4000 mower using the Gyrodine swivel hitch system.
Step-by-step guide for safely detaching the mower with a straight hitch.
Instructions for safely disconnecting the mower equipped with a Gyrodine hitch.
Pre-operation checklist to ensure proper setup and safety before starting the mower.
Procedure for setting the optimal cutting height for the mower conditioner.
Guidance on adjusting the header's suspension for proper ground following.
Recommendations for setting the correct PTO speed for efficient operation.
Guidelines for selecting appropriate forward speeds based on conditions.
How to adjust baffles and shields for optimal windrow formation.
Steps to set the conditioning intensity for different crop types.
Steps to set the mower into its working configuration before operation.
Maneuvering techniques for making U-turns at the end of fields.
Procedure for making sharp corner turns while minimizing tractor tire interference.
Chart detailing lubrication points, types of grease, and service intervals.
Locations and procedures for lubricating various grease points on the machine.
Instructions for checking and changing oil in the machine's gearboxes.
Guidelines for inspecting blades and securing hardware for safety and performance.
Step-by-step instructions for replacing worn or damaged mower blades.
Information on disc replacement and conditions requiring it.
Specific instructions for servicing and replacing half discs.
Procedure for inspecting and replacing worn skid shoes on the mower.
Details on the friction slip clutch, its adjustment, and troubleshooting.
Maintenance and replacement procedures for the drive chain of the upper rolls.
Procedures for bleeding hydraulic systems and synchronizing cylinders.
Wiring diagram and color code for electrical connectors on the machine.
Torque specifications for various metric fasteners used on the FC 4000.
Information regarding the installation and use of the drawbar safety chain.
Instructions for installing the quick hitch adaptation kit for tractor attachment.
To Next Page
