Putting into service
Mower conditioner
FC313 RF
31
-
Attach pto shaft guard chain in hole (1)on machine side.
Secondary PTO shaft
Friction slip clutch
The secondary PTO transmission shaft is fitted with a
friction slip clutch.
-
- Uncouple the secondary pto shaft on lateral gearbox
side.
Immediately replace any worn or damaged
guard.
1
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
Before the machine is put into service and
after a long period of non-use, check the
function of slip clutch to ensure it is not
locked up.
To Next Page
Loading...
