KUHN RPB User Manual

Configuration
Control box
RPB
35

Alarms
- Press on the button (1).
Flow alarm
This alarm indicates that the preset flow setting is not
reached.
- Press key (1) to switch from one mode to the other.
- Press on the button (2).
- Press key (1) to modify parameter.
No: Alarm deactivated.
Beep: Alarm activated. Low noise.
Buzzer: Alarm activated. Loud noise.
Trip: Time before the alarm is activated.
1
2
1
1

KUHN RPB Specifications

General

Brand	KUHN
Model	RPB
Category	Control Unit
Language	English