35
ENGLISH TECHNICAL PASSPORT
Ceramic hob & Induction hob
USING YOUR CERAMIC HOB
TO START COOKING
1. Place a suitable pan on the cook-
ing zone that you wish to use. Make sure
the bottom of the pan and the surface of
the cooking zone are clean and dry.
2. Touch the ON/OFF key After power
on, the buzzer beeps once, all displays
show «8», indicating that the hob has en-
tered the state of standby mode.
3. According to the heating zone
where the pan is placed, adjust heat set-
ting by touching the slider regulating key
control.
 If you don’t choose a heat setting
within 20 seconds, the ceramic hob will
automatically switch off. You will need to
start again at step 2.
 You can modify the heat setting at
any time during cooking.
Power up
Power down
To Next Page
Loading...
