42
TECHNICAL PASSPORT ENGLISH
Ceramic hob & Induction hob
TROUBLE SHOOTING
Before calling the customer services,
please check that the appliance is cor-
rectly connected.
Any of the following cases are not
covered by the guarantee:
 Damage caused by improper use,
storage or maintenance.
 Damage caused by unauthorised
disassembly and repair.
 Damage caused by misuse.
 Using the ceramic hob for com-
mercial purposes.
If an abnormality comes up, the ce-
ramic hob will enter the protective state
automatically and display corresponding
protective codes:
Error
Code
Possible Cause What to do
ER03 Water or pot cover the user interface Clean the user interface
H
When in standby state «H» and «0» repeatedly
display, when off: always display «H»
High temperature notice is the normal
notice. It will disappear automatically
when the temperature drops
E The temperature inside too high
Please contact the supplier to reconnect
the thermocouple
E7 The glass surface of the appliance is too hot Stop and cooling the appliance
Ceramic Hob
Error
Code
Possible Cause What to do
No pot or pot not suitable Replace the pot
ER03 Water or pot on the glass over the control Clean the user interface
F1E
The connection between the display board and
the left mainboard is fail (the cooking zone
which indicator showing «E»)
1. Connection cable not correctly plugged
or defective;
2. Replace the Mainboard
Induction Hob
To Next Page
Loading...
