43
ENGLISH TECHNICAL PASSPORT
Ceramic hob & Induction hob
Error
Code
Possible Cause What to do
F3E
Coil temperature sensor failure (the cooking
zone which indicator showing «E»)
Replace the coil sensor
F4E
Mainboard temperature sensor failure (the
cooking zone which indicator showing «E»)
Replace the mainboard
E1E
Temperature sensor of the ceramic glass plate
is high
Please restart after the induction hob cools
down
E2E Temperature sensor of the IGBT is high
Please restart after the induction hob cools
down
E3E Abnormal supply voltage (too high)
Please inspect whether power supply is
normal; Power on after the power supply
is normal
E4E Abnormal supply voltage (too low)
Please inspect whether power supply is
normal
E5E Power on after the power supply is normal
The connecting cable is incorrectly
connected or the assembly is faulty
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the ceramic hob and please contact the supplier.
Please note!
The following shall not be considered as defects of the Product
Induction and
electric cooktops
Sound of working of induction cooking zones at activation of increased power
Dark, visually non-luminous segment of the thermostat on a glass ceramic cooking
zone
Discoloration of desktop surface when using the product
To Next Page
Loading...
