EasyManuals Logo

Kurtz Ersa HR 600/2 User Manual

Kurtz Ersa HR 600/2
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
6| Function description
Read this first!
6.1 Read this first!
6.1.1 Target readers group
These instructions are intended for people who use, adjust, operate or service the
machine.
DANGER
Personal injury or material damage due to inadequate maintenance and improper
operation of the machine!
ü Use only qualified personnel!
a) The machine transport, assembly, connection, commissioning, operation or main-
tainance by people who are not sufficiently qualified and informed can cause
severe damage to the machine or damage to people.
b) Such work may therefore only be performed by properly trained personnel! This
personnel must be able to recognize the hazards that can be caused by the sys-
tem mechanical, electrical or electronic equipment.
c) The people who carry out such work must know and have understood the con-
tents of these instructions.
d) Any person involved in the installation, commissioning, operation and/or main-
tenance of the machine must have read and understood the contents of the
"Safety instructions" chapter, as well as the chapters which are relevant for the
specific activity!
6.1.2 Supplementary documents
NOTE
Supplementary documents
Supplementary documentation and service instructions are available for the machine
single modules. These documents can be found in the [USB flash drive Rework] data
carrier which is included in the scope of delivery. With regard to this, please read
these documents if this instruction manual does not provide sufficient information on
a certain subject.
Ersa GmbH 3BA00207_01 Operating Instructions HR 600_2|Rev. 3 50/169

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kurtz Ersa HR 600/2 and is the answer not in the manual?

Kurtz Ersa HR 600/2 Specifications

General IconGeneral
CategoryDesktop
ModelHR 600/2
Air FlowAdjustable
Voltage230 V
Frequency50/60 Hz
ApplicationRework
TypeRework system