Introducing Artis SE
Keeping the Artis SE up to date
2
Keeping the Artis SE up to date
Be sure to check the Kurzweil Music Systems website at http://www.kurzweil.com for new
documentation and the latest software updates for Artis SE.
Do You Have Everything?
Your Artis SE package should contain the following in addition to your instrument:
• Power adapter and cable
• Switch pedal
• USB cable (Type-A-to-Type-B)
• 4 self adhesive feet
• Artis SE Getting Started guide (this book)
If you don’t have any of these components, please contact your Kurzweil / Young Chang
dealer to get them.
Before You Start…
Don’t connect anything until you make sure the Artis SE is properly and safely situated.
If your Artis SE keyboard has been out in the cold, give it time to warm up to room
temperature before starting it, since condensation may have formed inside.
Setting up the Artis SE
1. Set the keyboard on a hard, at, level surface.
2. Four adhesive-backed rubber feet are provided with Artis SE. Carefully turn the keyboard
over onto a soft surface, remove the paper backing from the rubber feet and attach them.
NOTE : Unless the instrument will always be used with a
keyboard stand, attachment of the rubber feet is strongly
advised. Otherwise protruding screws will scratch the tabletop
and may increase the key action sound.
To Next Page
Loading...
