Kurzweil KP150 - Function Menu: Beat, Pedal & EQ; Beat Type and Metronome Volume; Pedal Type and EQ Type

Function Menu
25
Beat Type
1. Repeatedly press the [FUNCTION] button to select beat type menu.
The LCD displays “xxx BeatType”. Use [+/YES]/ [-/NO] button or
data dial to change beat type. The range of beat type: 0, 2~9.
2. Press [+/YES] and [-/NO] buttons simultaneously will set the beat
type value to its default setting: 004.
Metronome Volume
1. Repeatedly press the [FUNCTION] button to select metronome
volume menu. The LCD displays “xxx MetroVol”. Use [+/YES]/
[-/NO] button or data dial to adjust metronome volume value.
The range of metronome value is: 0 ~ 127.
2. Press [+/YES] and [-/NO] buttons simultaneously will set the
metronome volume value to its default setting: 080.
Pedal Type
1. Repeatedly press the [FUNCTION] button to select pedal type
menu. The LCD displays “00x Pedal xxxx”. Use [+/YES]/ [-/NO]
button or data dial to change pedal type.
There are 4 types of pedal are available.
2. Press [+] and [-] buttons simultaneously will set the pedal type to
its default setting: 001 PedalSustain.
The pedal types are as follows:
EQ Type
Equalizer is a sound processor that can be used to adjust gain value of
each frequency band of sound, different gain value setting can make a
different sound field effect. You can select one of the 6 preset EQ
settings in the EQ display.
1. Repeatedly press the [FUNCTION] button to select the EQ type
menu. The LCD displays “006 EQ Reset”. Use [+/YES]/ [-/NO]
button or data dial to change EQ type.
2. Press [+] and [-] buttons simultaneously will set the EQ type to its
default setting: 006 EQ Reset.
LCD
PedalSustain
PedalSoft
PedalSt/Stop
PedalMemory
No.
1
2
3
4
Pedal Function
Sustain Pedal
Soft Pedal
Start/Stop Pedal
Memory Switch Pedal
Advanced Use