31
Stop Recording
1. When recording is in process, holding down [SHIFT] button and
then press the [RECORD] button to stop recording.
2. When recording is in process, if the memory is full, the recording
will stop and save automatically, and the LCD displays “Rec_Full”.
3. If you choose the accomp recording, the recording will stop
automatically when the ending of the rhythm finishes.
Playback Recording
1. When recording is in process, holding down [SHIFT] button and then
press the [RECORD] button, it will stop recording and enter the song
play mode, the LCD displays default name “UserSong” and number
of user song, the current recorded song will play automatically in
circle.
2. Press the [SONG] button to enter the song mode and it will play all
songs circularly. Use the data dial, [+/YES] or [-/NO] button to select
a song, there are 155 songs in all, including 5 user songs
(151~155). If there is no data in the selected user song, it will
display “NoFile!” and stop playing.
3. You can select one user song in song stop playing mode, press
[START/STOP] button, this user song will play circularly.
Note:
1. All user songs won’t be erased even turn the instrument off.
2. In user song selection mode, just easily press the corresponding
track button to choke track, the prompt icon goes out at the same
time and the tracks you have selected will not be sounded while
playing back it.
Delete User Song
1. Pressing and holding [RECORD] and [STORE] button together and
turn power on simultaneously, all user songs will be erased.
2. In the recording preparation status, holding down [SHIFT] button
and then press the [RECORD] button for two seconds, the LCD will
display “Delete?” Now you can press [ACCOMP] (or [MELODY 1] to
[MELODY 5]) button to select the track you want to delete.
When some track indicate is lightened, it indicates that the track
data you want to delete, otherwise, it indicate that the track data you
want to keep. If all the track indicates are lightened, the whole user
song will be erased after confirmation.
3. Choose the track you want to delete, press [+/YES] to confirm and
the recorded data in this track will be erased. Press [-/NO] to quit
this step, and go back to the recording preparation status.
Record
Advanced Use
To Next Page
Loading...
Need help?
General
