5-8
Descriptions of Parameters
KB3 Editor Parameters
Leakage
Controls the level of the simulated crosstalk and signal “bleed” of adjacent tone wheels in the
model. This is provided to help “dirty up” the sound to make it a bit more realistic. A setting of
-96 dB gives the purest tones; other values add more simulated leakage (the maximum is
0.0 dB). The leakage level is scaled by the drawbar levels, as well as by the expression pedal
level.
Amp
Standard amplitude (volume) control, ranging from -96 dB to +48 dB.
The Envelope Menu
Keyclick
Enables/disables Keyclick. Values are On or Off.
Keyclick Volume (KeyclickVol)
Adjusts the volume of the keyclick when the value of the Keyclick parameter is On.
NoteAttack
Controls the attack characteristic of KB3 notes.
Normal
Smoothed attack.
Hard
Instant attack with audible click, in addition to any amount of key click specified with the
Keyclick and KeyclickVol parameters (you might want to set Keyclick to
Off when you use this
setting).
PercHard
Hard attack level for percussion only; notes without percussion use a normal attack.
NoteRelease
Controls the release characteristic of notes.
Normal
Smoothed release.
Hard
Instant release with audible click.
To Next Page
Loading...
Need help?
General
