___________________________________________________________________________________________
GCU-3000 15
SECTION 4 : FAILURE WARNING
DESCRIPTION
4.1 Failure Signal Reference Table
GCU-3000 is equipped with a large highly illuminating
LCD screen were all of the failure notices are
graphically and audible indicated with the built in failure
warning alarm.
Universal Failure Icons Reference Table
4.2 Warning
When the GCU detects a problem during operation, but
the situation do not pose immediate danger to the
genset or the operating personnel, the GCU gives you
a warning not a shutdown
With a Warning, the genset continues normal operation
and provides power to the load. The warning
message(s) continue to flash on the screen and the
failure Signal / Alarm output is activated. The warning
is automatically reset once the failure is corrected.
4.3 Shutdown
When a major failure is detects and it poses immediate
danger to the genset and its personnel, the system
shut-down immediately, the failure is noted on the
screen activating the alarm. After the failure(s) are
cleared, press the (OFF) button to confirm and reset
the failure warning notice(s).
SECTION 5 : SPECIFICATION
To Next Page
Loading...
Need help?
General