EasyManua.ls Logo

KVH Industries TracVision G8 User Manual

KVH Industries TracVision G8
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
owner’s
manual
Guide to Operation
Guide to Technical Information
A Guide to TracVision
®
G8
TVG8_OM_BinderCover_9.03
KVH
®
TracVision
G8
Satellite Television

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the KVH Industries TracVision G8 and is the answer not in the manual?

KVH Industries TracVision G8 Specifications

General IconGeneral
BrandKVH Industries
ModelTracVision G8
CategorySatellite TV System
LanguageEnglish

Summary

Guide to Operation

1 System Overview

Overview of the TracVision G8 system, components, compatibility, and tracking.

7 Using the MCU Interface

Guide to operating and monitoring the TracVision G8 system via the MCU.

Guide to Technical Information

2 Installation

Explains how to install, configure, and test the TracVision G8 system.

3 Using the MCU Interface

Details how to use all MCU functions to operate, control, and monitor the system.

4 Troubleshooting

Identifies basic trouble symptoms and lists their possible causes and solutions.

5 Maintenance

Details system components, replacement procedures, and preventive maintenance routines.

Installation

2.1 Planning the Installation

Guidance on planning the installation, including who should install and required materials.

2.2 Mounting the TracVision Antenna

Instructions for choosing the best location and mounting the antenna unit.

2.3 Connecting the IRD(s)

Steps for connecting the satellite TV receiver(s) (IRDs) to the TracVision antenna.

2.4 Wiring the MCU

Details how to connect the antenna data/power, vessel power, and IRD ground wires to the MCU.

2.5 Mounting the MCU

Instructions for mounting the Master Control Unit (MCU) using Velcro or flush-mounting.

2.6 Activating/Programming the IRD

Guide to activating and programming the IRD for use with the system.

2.7 Installing Satellites Using the MCU

Procedure for installing selected satellites (A and B) using the MCU.

2.8 Checking Out the System

Steps to verify that the installed system functions properly.

Using the MCU Interface

3.1 Startup and Self-test

Describes the startup sequence and self-test procedures for the TracVision G8.

Troubleshooting

4.1 Troubleshooting Matrix

Identifies trouble symptoms, causes, and references for solutions.

4.2 Causes and Remedies for Common Operational Issues

Addresses common issues affecting system performance and provides solutions.

Maintenance

Related product manuals