Your TracVision HD11 system has been designed to be easy to operate and
maintain. View the system’s status, change satellites, and modify settings
using any one of these interfaces:
• Web interface
• KVH TracVision HD11 iPhone
®
/iPad
®
/iPod touch
®
App
• Antenna Control Unit (ACU) screen and buttons
Remember, for best results, the antenna(s) needs a clear view of the sky.
Objects such as bridges and boat masts can block satellite signals.
Use the buttons on the front panel of the ACU to view or change system settings.
ANTENNA
POWER
CONTROL UNIT
ACCEPTCHANGE EXITMENUS
®
DIRECTV 101W
TRACKING
Using the ACU
Using a computer or smartphone connected to the HD11’s Ethernet or Wi-Fi
network, simply enter the ACU’s IP address into your web browser’s address
bar. Alternatively, you can enter: http://hd11-<ACU serial number>.local
Log into the web interface:
username: admin
password: password
You can view the ACU’s IP address and serial number on the ACU’s front panel display. Press the ACU’s MENU button until
you see the “ABOUT SYSTEM” Menu, select it, and then scroll through until you see the desired information.
Using the Web Interface
1.
Using your iPhone/iPad/iPod touch, connect to the HD11’s Ethernet
or Wi-Fi network.
Open the TracVision HD11 App. Then select your HD11 system (displayed
as hd11-<ACU serial number>.local) in the “Select HD11 Device” window.
Download the FREE TracVision HD11 App from the Apple iTunes store!
Using the iPhone/iPad/iPod touch App
1.
2.
TracVision
®
HD11 User’s Guide
2.
To Next Page
Need help?
General
